| Nome do ítem | Fabricante | Aplicativo |
|---|
| AT24C164-10PI-2.5 | Atmel | 2-wire serial EEPROM 16K(2048 x 8) |
| AT49BV4096A-12RI | Atmel | 4-Megabit (256K x 16) CMOS flash memory, 25mA active, 0.05mA standby |
| AT25640T1-10TI | Atmel | SPI serial EEPROM, 64K (8192 x 8), 2100kHz, 4.5V to 5.5V |
| AT25128W-10SI | Atmel | SPI serial EEPROM 128K (16,384 x 8),3000kHz |
| AT27C010L-12JI | Atmel | 1Megabit(128K x 8) OTP CMOS EPROM,25mA max |
| AT29C010A-12TC | Atmel | 1 Megabit (128K x 8) 5-volt only CMOS flash memory |
| AT80F51-12PC | Atmel | 8-Bit microcontroller with 4K bytes QuickFlash memory, 12MHz, 5V |
| AT89C55-24PI | Atmel | 8-Bit microcontroller with 20K bytes flash,5V power supply |
| AT89S53-33PC | Atmel | 8-Bit microcontroller with 12K bytes flash, 33MHz, 4.5V to 5.5V |
| AT49LV002NT-70JC | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.1mA standby |
| AT24C01A-10TC | Atmel | 2-wire serial EEPROM 1K(128 x 8) |
| AT17C128-10JI | Atmel | FPGA configuration EEPROM, 5V-devices |
| AT49BV002T-90VI | Atmel | 2-Megabit (256K x 8) single 2.7-volt Battery-Voltage flash memory, 50mA active, 0.3mA standby |
| T89C51RD2-SMFI-L | Atmel | 0 to 25 MHz flash programmable 8-bit microcontroller, 80C52 compatible, 8051 pin and instruction compatible, 256 bytes RAM, EEPROM 2Kbytes, flash 64Kbytes |
| AT89C55-24JC | Atmel | 8-Bit microcontroller with 20K bytes flash,5V power supply |
| AT27C1024-90PC | Atmel | 1-Megabit (64K x 16) OTP EPROM |
| AT90S8515 | Atmel | 8-bit microcontroller with 8K bytes in-system programmable flash, 2.7-6.0V |
| AT28HC256-70PC | Atmel | 256(32K x 8) high speed CMOS EPROM |
| AT28HC256E-90UM/883 | Atmel | 256(32K x 8) high speed CMOS EPROM |
| ATF16V8BQ-10PC | Atmel | High-performance flash PLD |
| AT34C02N-10SI-2.7 | Atmel | 2-Wire serial EEPROM with permanent software write protect 2K(256 x 8), 100kHz, 2.7V to 5.5V |
| AT89LV51-12PC | Atmel | 8-bit microcontroller with 4K bytes flash,2.7V to 6V |
| AT27BV4096-12VI | Atmel | 4 Megabit(256K x 16) unregulated battery-voltage high speed OTP CMOS EPROM, 8mA active, 0.02mA standby |
| AT49LV080-20CC | Atmel | 8-Megabit (1M x 8) single 2.7-volt battery-voltage flash memory, 25mA active, 0.05mA standby |
| AT27C800-15TC | Atmel | 8-Megabit (512K x 16 or 1024K x 8) UV erasable EPROM, 50mA active, 0.1mA standby |
| AT49BV001-90JI | Atmel | 1-Megabit (128K x 8) single 2.7-volt Battery-Voltage flash memory, 50 mA active, 0.3mA standby, 2.7V to 3.6V |
| AT24CS128N-10SI-2.7 | Atmel | 2-wire serial EEPROM with permanent software write protect 128K(16,384 x 8), 400kHz,twr(max) 10ms |
| AT28C010-15TI | Atmel | 1 Megabit (128K x 8) paged CMOS EEPROM |
| AT90LS4433-4AI | Atmel | Microcontroller, in-system programmable flash=4K, EEPROM=256B, SRAM=128B, voltage range=2.7V - 6.0V, 4 MHz |
| AT25HP256C1-10CI-1.8 | Atmel | SPI serial EEPROM 256K(32,768 x 8) |
