| Nome do ítem | Fabricante | Aplicativo |
|---|
| MAX537AEWE | MAXIMIC | Calibrated, quad, 12-bit voltage-output DAC with serial interface. +-5V supply operation. INL (LSB) +-1/2 |
| MX536AKQ | MAXIMIC | 1V. Auxiliary dB output 60dB range. Low power 1.2mA(typ). |
| MAX635BEJA | MAXIMIC | Preset -5V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 10%. |
| MAX473CSA | MAXIMIC | Single, 10MHz single-supply op amp. |
| MAX6337US18D3-T | MAXIMIC | Ultra-low-voltage, low-power microprocessor circuit with manual reset (reset output active-low, open-drain) . Reset threshold(typ) 1.8V, reset timeout(min) 100ms. Standard version |
| MAX803LEXR-T10 | MAXIMIC | Microprocessor reset circuit Reset threshold 4.63V. Open-drain active-low reset. 10k increments. |
| MX7534AQ | MAXIMIC | Microprocessor-compatible, 14-bit DAC. INL +-2 LSB. |
| MAX552BCUB | MAXIMIC | +3V, 12-bit, serial, multiplying DAC. Linearity(LSB) +-1. |
| MAX6316MUK46AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.630V, min reset timeout 1ms, typ watchdog timeout 102ms |
| MAX6316LUK26CY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.630V, min reset timeout 140ms, typ watchdog timeout 1.6sec |
| MAX291CWE | MAXIMIC | 8th-order, lowpass, switched-capacitor filter. |
| MAX385MJE | MAXIMIC | Precision, low-voltage analog switch. |
| MAX522CPA | MAXIMIC | Dual, 8-bit, voltage-output serial DAC. |
| MAX220EPE | MAXIMIC | +5V-powered, multichannel RS-232 driver-receiver. |
| MAX110BEPE | MAXIMIC | Low-cost, 2-channel, 14-bit serial ADC. |
| DG308ADY | MAXIMIC | Quad, SPST, NO analog switch |
| MAX6316MUK34CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX6378UR35-T | MAXIMIC | Ultra-low-power voltage detector, 3.5V |
| MAX6319MHUK40C-T | MAXIMIC | Microprocessor supervisory circuit with manual reset (manual reset input, reset outputs active-high, push/pull and active-low, bidirectional).Factory-trimmed reset threshold(typ) 4.000V, reset timeout(min) 140ms |
| MX574ALEPI | MAXIMIC | Industry standard complete 12-bit A/D converter. 25 microsec. max conversion time. Linearity (LSBs) 1/2. TEMPCO(ppm/C) 19. |
| MAX806TC/D | MAXIMIC | 3.0V or 3.3V microprocessor supervisory circuit. Reset threshold 3.075V. Active-low reset. Manual reset input. Backup-battery switch. Power-fail threshold accuracy +-2%. Power-fail comparator. Reset window +-2% |
| MAX6306UK37D2-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 3.608(min),3.793(max) Nominal timeout period 20ms. |
| MAX6316LUK25CZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 2.500V, min reset timeout 140ms, typ watchdog timeout 25.6sec |
| MAX1248ACEE | MAXIMIC | +2.7V to 5.25V, low-power, 4-channel, serial 10-bit ADC. INL (LSB) +1/2,-1/2 |
| MAX635AMJA | MAXIMIC | Preset -5V output or adjuistable output with 2 resistors, CMOS switching regulator. Output accuracy 5%. |
| MAX6316LUK34BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.400V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| DG381CJ | MAXIMIC | General purpose CMOS dual analog switch. |
| MAX3296C/D | MAXIMIC | 3.0V to 5.5V, 2.5Gbps LAN laser driver. |
| MX566AKD | MAXIMIC | High speed 12-bit monolithic D/A converter. Error +-1/4LSB |
| MAX4051AESE | MAXIMIC | Low-voltage, CMOS analog multiplexer |
