| Nome do ítem | Fabricante | Aplicativo |
|---|
| DG305C/D | MAXIMIC | CMOS dual and quad analog switch. |
| MAX6225BEPA | MAXIMIC | Low-noise, precision, +2.5V output voltage reference. Max TEMPCO (ppm/C) 7.0. |
| MAX6306UK43D1-T | MAXIMIC | Multiple-input, programmable reset IC (open-drain reset output, factory-set reset threshold on Vcc, 1 additional undervoltage reset input, manual reset input). Factory-trimmed reset thresholds 4.193(min),4.408(max) Nominal timeout period 1ms. |
| MAX8211EJA | MAXIMIC | Microprocessor voltage monitor with programmable voltage detection. Define output current limit. |
| MAX6316MUK44CW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 4.390V, min reset timeout 140ms, typ watchdog timeout 6.3 |
| MAX680CPA | MAXIMIC | +5V to +-10V voltage converter |
| MAX807LCPE | MAXIMIC | Full-featured microprocessor supervisory circuit with +-1.5% reset accuracy. Reset threshold (typ) 4.675V |
| MAX5250BCAP | MAXIMIC | Low-power, quad, 10-bit, voltage-output DAC with serial interface. INL(LSB) +-1. |
| MAX6321HPUK38BX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 3.800V, reset timeout(min) 20ms, watchdog timeout(typ) 102ms |
| MAX319MJA | MAXIMIC | Precision, CMOS analog switch |
| MAX6318LHUK44AZ-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset,(watchdog input,reset output active-low,push/pull; active-high,push/pull).Factory-trimmed reset threshold(typ) 4.390V min, reset timeout 1ms,typ watchdog timeout 25.6sec |
| DG306ABWE | MAXIMIC | CMOS dual and quad analog switch. |
| MAX152C/D | MAXIMIC | +3V, 8-bit ADC with 1 micro A power-down |
| MAX6313UK44D2-T | MAXIMIC | Multiple-input, programmable reset IC (push/pull reset output,factory-set reset threshold on Vcc, 1 additional undervoltage reset input,negative/overvoltage reset input).Factory-trimmed reset thresholds 4.270(min) 4.490(max).Nominal timeout period 20ms. |
| ICM7224C/D | MAXIMIC | 4-1/2 digit counter |
| MAX6316MUK31BY-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,bidirectional).Factory-trimmed reset threshold (typ) 3.080V, min reset timeout 20ms, typ watchdog timeout 1.6sec |
| MAX8213BC/D | MAXIMIC | Five universal voltage monitor - complete microprocessor voltage monitoring. Open-drain outputs. |
| MAX6316LUK39AX-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 3.900V, min reset timeout 1ms, typ watchdog timeout 102ms |
| ICL7662EBA | MAXIMIC | CMOS voltage converter |
| MAX4333EUB | MAXIMIC | Dual, low-power, single-supply, Rail-to-Rail I/O op amp with shutdown. |
| MAX6321HPUK26DW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog (watchdog input, reset outputs active-high, push/pull and active-low, open-drain).Factory-trimmed reset threshold(typ) 2.630V, reset timeout(min) 1.12sec, watchdog timeout(typ) 6.3ms |
| MAX8868EUK28-T | MAXIMIC | Low-noise, low-dropout, 150mA linear regulator with auto discharge function. Preset output voltage 2.80V |
| MAX1710EEG | MAXIMIC | High-speed, digitally adjusted step-down controller for notebook CPUs. |
| MAX6346XR34-T | MAXIMIC | Microprocessor supervisory circuit (reset output active-low, push-pull). Reset threshold (typ) 3.400V. Order increment 10k |
| MXD1000C/D45 | MAXIMIC | 5-tap silicon delay line |
| MAX4517EPA | MAXIMIC | +-1V to +-6V dual-supply opration, low-on-resistance, SPST, CMOS analog switch. Normally closed (NC). |
| MAX6316LUK40BW-T | MAXIMIC | Microprocessor supervisory circuit with watchdog and manual reset (watchdog input,manual reset input,reset output active-low,push/pull).Factory-trimmed reset threshold (typ) 4.000V, min reset timeout 20ms, typ watchdog timeout 6.3ms |
| MAX4603EAE | MAXIMIC | Low on-resistance (2.5om max), quad, SPST, CMOS analog switches (two NO and two NC switches). |
| MAX185BCWG | MAXIMIC | High-speed 12-bit A/D converter with external reference input. 10 microsec. max conversion time. Linearity(LSB) +-1. |
| MAX6363HUT29-T | MAXIMIC | Low-power microprocessor supervisory circuit with battery-on output. Reset threshold(typ) 2.93V. Active-high push-pull reset. |
