| Nome do ítem | Fabricante | Aplicativo |
|---|
| PST7034 | Mitsumi | System reset |
| MM1383XD | Mitsumi | RGB video amplifier with OSD input |
| PST9010 | Mitsumi | System reset |
| MM1165ZM | Mitsumi | Ultra-low power consumption low-saturation three-pin regulator with on/off pin |
| PST7046M | Mitsumi | System reset |
| MM3092D | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.3V |
| MM1036XF | Mitsumi | Motor driver |
| MM3092K | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.9V |
| PST993H | Mitsumi | System reset |
| MM1253AF | Mitsumi | Remaining battery power display |
| PST3132 | Mitsumi | CMOS system reset |
| PST3224 | Mitsumi | CMOS system reset |
| MM3103E | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.4V |
| PST574HM | Mitsumi | System reset |
| PST592HM | Mitsumi | System reset |
| MM1332CF | Mitsumi | Control of lithium ion battery chargihg |
| MM1217XF | Mitsumi | Elame detection amplifier |
| PST575E | Mitsumi | System reset |
| PST592C | Mitsumi | System reset |
| MM1108XD | Mitsumi | No-adjustment sync separator |
| MM3092F | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.5V |
| PST7022M | Mitsumi | System reset |
| MM1292HF | Mitsumi | Protection of lithium ion battery (two cells in series) |
| PST9126 | Mitsumi | System reset |
| MM1442XJ | Mitsumi | AV switch for IC BUS control, 4-input, 3 output and canal plus compatible |
| MM3093J | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.8V |
| MM1349D | Mitsumi | Step-up DC/DC coverter(PWM) |
| PST7033 | Mitsumi | System reset |
| PST575JM | Mitsumi | System reset |
| MM1336CF | Mitsumi | IC for headphone stereos (with volume-limiting circuit) |
