| Nome do ítem | Fabricante | Aplicativo |
|---|
| PST9131N | Mitsumi | System reset |
| MM1373D | Mitsumi | Detection of lithium ion battery overcharging |
| PST600HM | Mitsumi | System reset |
| MM1336DF | Mitsumi | IC for headphone stereos (with volume-limiting circuit) |
| PST9146N | Mitsumi | System reset |
| MM1006D | Mitsumi | IC for headphone stereos |
| MM3033G | Mitsumi | CMOS regulator for devices that use batteries and portable communications devices, output voltage = 3.6V |
| PST3255 | Mitsumi | CMOS system reset |
| MM1192XD | Mitsumi | HBS-compaqtible driver and receiver |
| PST592H | Mitsumi | System reset |
| MM1216GN | Mitsumi | Low-saturation three-pin regulator with externally mounted power transistor |
| PST3358 | Mitsumi | CMOS system reset |
| MM6561S | Mitsumi | High precision operational amplifier |
| MM3094E | Mitsumi | Low-ripple, low-saturation CMOS regulators, 4.4V |
| PST9224 | Mitsumi | System reset |
| MM1331C | Mitsumi | Step-up DC/DC coverter(VFF) |
| PST9225 | Mitsumi | System reset |
| PST9127N | Mitsumi | System reset |
| MM1293E | Mitsumi | Protection of lithium ion battery (three cells in series) |
| PST3355 | Mitsumi | CMOS system reset |
| MM3092E | Mitsumi | Low-ripple, low-saturation CMOS regulators, 2.4V |
| PST3446 | Mitsumi | CMOS system reset |
| MM1349C | Mitsumi | Step-up DC/DC coverter(PWM) |
| MM1509 | Mitsumi | Video switch Y/C mix |
| PST3323 | Mitsumi | CMOS system reset |
| MM1180CT | Mitsumi | Low-noise, low-saturation three-pin regulator |
| PST9219 | Mitsumi | System reset |
| MM1373C | Mitsumi | Detection of lithium ion battery overcharging |
| MM1257CM | Mitsumi | High-precision three-pin regulator |
| MM3103B | Mitsumi | Low-ripple, low-saturation CMOS regulators, 3.1V |
